Paste your Google Webmaster Tools verification code here

Questions?  Call (386) 795-1843

Surfside Home Inspections

4 Point Inspection Videos 

How To Pass The 4 Point Inspection

Click here for “How to Pass the 4 Point Inspection Flyer”

  1. Read this and view videos in each section to get more details
  2. Call Neil to ask questions if you have any
  3. Have repairs made if needed
  4. Schedule inspection

4 Point Inspection – What Inspectors Look For:

Electrical: This is an area that you do not want to play around with. As a Certified General Contractor I myself do not attempt to do repairs, replacement or maintenance on electrical panels or electrical components. I call a LICENSED ELECTRICIAN! This is no place for the do it yourselfer, I do not care how handy you are or what electrical contractor your nephew once worked for. Whenever we inspect panels installed or repaired by unlicensed personnel without pulling a permit it is invariably done wrong. Don’t gamble with the lives of your loved ones. Hire a properly licensed electrician who pulls permits.

Electrical Panel:(Remove objects from in front of electrical panel to make accessible before inspector arrives).

  • 1. Verify manufacturer of electrical panel. Many insurance companies will not insure Federal Pacific (FPE) panels along with a few other brands. Verify insurability with your insurance agent as this changes from one insurance company to another.
  • 2. Verify that electrical panel box and breakers are from the same manufacturer.
  • 3. Verify that Legend is filled out and legible so you can tell what circuits each breaker is controlling.
  • 4. Verify no open spaces in electrical panel. Sometimes there will be an empty space where a breaker or cover plate should be.
  • 5. Inspector will verify that there are no double taps and wiring is proper inside panel. Do not attempt to do this yourself. Unless you are a licensed electrician you have no business opening an electrical panel.
  • 6. Verify that there are no solid aluminum wire branch circuits visible.

 

 

  • GFCI Protection, Receptacles, Switches and Wiring:There is no “law” that requires upgrading to current GFCI protection standards if the home was built prior to the code requirement. But many insurance companies will not insure your home if the it does not at least have the bathrooms and kitchen protected.  Current building codes require that GFCI receptacles be installed at bathroom, kitchen and laundry sinks, tubs and showers.  They are also required in garages and on the building exterior. If you can stretch a 6′ string from the receptacle to the inside edge of a sink, shower or tub it must be a GFCI protected receptacle. I have found that if I can verify and state in the 4 Point Inspection that the receptacles within 6′ of any inside edge of a sink, shower or tub is GFCI protected then we do not have an issue with any insurance company regarding GFCI protection.  Consult a licensed electrician if you need GFCI protection installed.  There are multiple ways this can be accomplished.

 

  1. Cover Plates:  No cover plates should be missing from electrical switches, receptacles or junction boxes.
  2. Smoke Detectors:  All smoke detectors are in working condition. Located inside bedrooms, hallways leading to bedrooms and attached garages.
  3. Exposed Wiring:  No exposed romex wiring or electrical connections in any room including attached sheds, laundry rooms and workshops. This includes romex wiring at garbage disposal.

 

 

Air Conditioning and Heating:

  1. Air conditioner and heating system should be installed, complete and operable.

 

 

 

 

 

 

 

 

 

 

Plumbing:

  1. 1. Types of plumbing materials present (copper, PVC, CPVC, PEX, polybutylene, galvanized, etc.)
  2. 2. Any water leaks at sinks, drains, supply lines, valves and washing machine hoses.
  3. 3. No evidence of previous leaks.  The insurance company requires that the report contain pictures of plumbing under the sinks.  If they see evidence of previous leaks they will assume damage was done and not repaired. Painting over water stains is all that is necessary.

 

 

 

 

 

 

Water Heater: (Remove objects from in front of water heater to make accessible before inspector arrives)

  1. 1. No leaks
  2. 2. Electrical wiring in protective conduit. Electrical covers installed.
  3. 3. ¾” TPR Valve Drain Line installed properly. Needs to be made of rigid material, have no more than 4 elbows, terminate within 6″ of floor, no threads permitted at termination point. May terminate at floor next to water heater, not required to be plumbed to outside.

 

 

 

 

 

 

 

Roof:

  1. 1. No lifting, curling, broken or missing shingles.
  2. 1. No missing aggregate
  3. 2. No indications of leaks.
  4. 3. No damaged flashings including pipe flashings.

 

 

 

 

 

 

 

 

At Surfside Home Inspections we offer Pre-purchase Home Inspections, Wind Mitigation Reports, 4 Point Inspections and Roof Certification Inspections.

Surfside Home Inspections Inspections serves all of the following cities:

Port Orange – Daytona Beach – Daytona Beach Shores – Deland –  Deltona – Edgewater – Flagler Beach – Holly Hill – New Smyrna Beach – Oak Hill – Ormond  Beach – Ormond-by-the-Sea – Palm Coast – Ponce Inlet –  South Daytona – Wilbur by the Sea